Линеарно појачало са оптичким влакном допирано са ербијумом, комбинује предности ПА појачала и БА појачала које са високим појачањем, великом предајном снагом и релативно ниским шумом.
The Line amplifier (LA) is an optical power amplifier product dedicated to line relay in fiber laser or fiber communication system. It combines the advantages of PA amplifier and BA amplifier. Which with high gain, high transmit power, and relatively low noise. Between the optical fiber segments to increase the relay length or the corresponding single-point to multi-point part of the optical access network to compensate for branch losses.
Wide wavelength range;
High gain factor;
High output power.
Optical fiber communication;
Optical fiber sensor;
Fiber laser.
| Parameters | Unit | Values | Notes |
| Operating wavelength | nm | 1530~1565 | C-band |
| Input power | dBm | -25~-3 | |
| Saturated output power | dBm | 13/17/23/25/26 | @-10dBm Input |
| Small signal gain coefficient | dB | 35 | @-25dBm Input |
| Noise figure | dB | 5.5 | @-10dBm Input |
| Gain flatness | dB | 3 | |
| Polarization dependent gain | dB | 0.5 | |
| Polarization mode dispersion | ps | 0.5 | |
| Input/Output isolation | dB | >35 | |
| Fiber type | - | SMF-28e | |
| Connector | - | FC/APC | |
| Operating mode | - | ACC/APC | |
| Dimensions | mm | 260(W)×280(D)×120(H) | Benchtop |
| 125(W)×150(D)×20(H) | Module | ||
| Power supply | V | AC 110~240V, <30W@25℃ | Benchtop |
| 5VDC, <15W | Module | ||
| Control mode | - | RS232 Serial communication | Module |
| Communication Interface | - | DB9 Female | Module |
| Operating temperature | ℃ | -5~ +55 | |
| Operating humidity range | % | 0~70 |
All products have been tested before shipping out;
All products have 1-3 years warranty.(After the quality guarantee period began to charge appropriate maintenance service fee.)
We appreciate your business and offer an instant 7 days return policy. (7 days after receiving the items);
If the items you purchase from our store are not of perfected quality, that is they don‘t work electronically to manufacturers specifications, simply return them to us for replacement or refund;
If the items are defective, please notify us within 3 days of delivery;
Any items must be returned in their original condition to qualify for a refund or replacement;
The buyer is responsible for all the shipping cost incurred.
A: C-band or L band wavelength.
Q: What is the requirement for the output power?A: our company can customize according to your requirement.
Q: About the package dimension, do you have any requirement?A: We have the module type and benchtop for choice.
Ауторско право @ 2020 Схензхен Бок Оптроницс Тецхнологи Цо., Лтд. - Кинески оптички модули, произвођачи ласера са спојеним влакнима, добављачи ласерских компоненти Сва права задржана.
